气动纤维带、编织捆扎带拉紧器 ,打包宽度50MM
Our Pneumatic Tensioner up to 50mm RV has especially been designed for the use on our lashings.
With our pneumatic tensioner, all textile lashings with widths of up to 50 mm can be processed.
Our Pneumatic Tensioner up to 50 mm is reversible .
The winding spindle is turnable in both directions, allowing to release highly pretensioned strappings by a simple push of a button to make it easier to release the tensioner.
This feature facilitates pretensioning in free space without supporting surface (e.g. in containers, flatracks, etc.). This tensioner is not available with cutting device.
Advantages:
Type: Phneumatic Tensioner RV up to 50 mm
Suitable for textile lashings with widths of up to 50 mm.
Pneumatic Tensioner up to 50 mm item no. 089192
Item no. | Part description | Qty. |
000-001 | Head cap screw DIN 912 - M3 x 6-8.8 | 1 |
000-034 | Head cap screw DIN 912 - M5 x 25-8.8 | 4 |
000-214 | Countersunk screw DIN 7991 - M5 x 16-10.9* | 1 |
000-633 | Hexagon socket set screw DIN 913 - M6 x 16-45H | 1 |
000-657 | Hexagon nut ISO 4035 - M6-8 | 1 |
000-871 | Stuffing plug M8 | 1 |
000-912 | Sleeve 2220 DU | 1 |
000-961 | Flange bushing BB 1612 DU | 1 |
001-082 | Parallel pin ISO 8734 - 5 x 16-A-St | 2 |
001-211 | Spiral pin ISO 8750 - 5 x 32-St | 1 |
001-228 | Spiral pin ISO 8750 - 6 x 32-St | 1 |
001-551 | Shim ring DIN 988 - 36 x 45 x 0,1 | As required |
001-552 | Shim ring DIN 988 - 36 x 45 x 0,5 | As required |
001-553 | Shim ring DIN 988 - 36 x 45 x 1 | As required |
001-831 | Parallel key DIN 6885 - A4 x 4 x 32-C45K | 1 |
001-845 | Parallel key DIN 6885 - B5 x 5 x 22-C45K | 1 |
001-863 | Shim 12 x 24 x 0,1 | As required |
001-864 | Shim 12 x 24 x 0,25 | As required |
001-865 | Shim 15 x 28 x 0,1 | As required |
001-866 | Shim 15 x 28 x 0,25 | As required |
001-867 | Shim 16 x 28 x 1 | 2 |
005-720 | Quick-action valve 25KA TF09 MPN | 1 |
005-721 | Plug-in nipple R1/4 25SF AK13 SXN | 1 |
008-090 | Thrust bearing disk AS 1226 | 1 |
010-032 | Axial needle bearing AX 4 12 26 | 1 |
010-077 | Combined needle bearing with bottom RAX 712 | 1 |
035-064 | Worm A35 Ü 10 B | 1 |
035-065 | Worm gear A35 Ü 10 B | 1 |
035-069 | Angular contact rad. ball bearing DIN 628 - 7201 B | 1 |
038-010 | Hand lever | 1 |
038-027 | Leg spring | 1 |
038-038 | Lever plate | 1 |
038-187 | Sealing ring G 26 x 34 x 4 | 1 |
038-188 | Washer CP 2 12 26 | 1 |
038-190 | Compressed air lamellar motor LZB 33 AR 004-005 | 1 |
040-004 | Sealing ring G 35x42x4 | 1 |
040-005 | Needle bushing DIN 618 - HK 3516 | 1 |
040-006 | Angle bracket | 1 |
040-010 | Needle bearing NB 15 23 16 | 1 |
040-014 | Winding shaft | 1 |
040-016 | Thrust bearing disk AS 1528 | 1 |
040-018 | Axial needle bearing AX 4 15 28 | 1 |
040-047 | Leaf spring | 1 |
040-050 | Clamp | 1 |
040-053 | Clamp plate | 1 |
040-054 | Tap bolt | 1 |
040-102 | Housing | 1 |
040-123 | Clamping shaft | 1 |
040-126 | Spacer lever | 1 |
040-131 | Bearing cap | 1 |
Suspender for Pneumatic Tensioner up to 50 mm item no. 040-900
Item no. | Part description | Qty. |
000-247 | Countersunk head screw DIN 7991 - M8x40-8.8 | 1 |
000-660 | Hexagon nut DIN 936 - M8-04 | 1 |
000-861 | Plug GPN 200Z 8x10 | 1 |
001-460 | Spring type straight pin ISO 8752 - 3x10 | 1 |
001-468 | Spring type straight pin ISO 8752 - 3x22 | 1 |
001-545 | Shim ring DIN 988 - 10x16x0,1 | As required |
001-776 | Disk spring DIN 2093 - B20 | 1 |
010-010 | Clevis | 1 |
010-014 | Head cap shoulder screw ISO 7379 - 10-M8x25-12.9 | 1 |
040-901 | Side bar | 1 |
040-902 |