The Mytho stretch wrapping machine is a unique design, fully automatic turntable machine. Installed in a conveyor line the machine requires no operator intervention other than to change the rolls of film. Due to the compact action of the lifting arm the machine can be used in areas with low headroom without the need for any special parts and the delay associated with their delivery. The unit for raising and lowering the film carriage is a sealed for life screw jack so maintenance is much reduced and safety is increased. The use of powered rollers to pre stretch the film before application greatly increases the yield from a film roll and also improves load containment.
Every automatic stretch wrapping machine from Atlanta is custom built to the exact customer requirements and specification. All items of the build can be specified including the PLC, pneumatic components, drive motors and inverters, even the colour of both the moving and static parts of the machine. The top sheet cover can be applied before, or during the wrapping process to give a dustproof or waterproof wrap. At the end of the sequence the film can be welded to secure the tail against the load or, if the side of the load is uneven, such as sacks, the film can be "tucked" under previous layers of film to secure it.
Standard pallet sizes are 1200mm x 1000mm and 1200mm x 800mm but smaller and much larger dimensions can be wrapped as well as load heights up to 2400mm (taller on request).